<vhxi class="ccdsz"></vhxi>


    歡迎進入江蘇Allwincity智能裝備有限公司官方網站!

    產品展示

    Product Center

    地址:江蘇省宜興市周鐵鎮竺西工業區興達路1號(國家級機械裝備製造基地)
    聯係方式:
    銷售總監:18861546508
    電話:0510-68995979
    傳真:0510-68995978
    Q Q:2851511808
    您當前的位置: 首頁 > 產品展示 > 智能包裝係列
    L型熱熔膠封箱機

    L型封箱機.jpg

    技術參數 Technical Parameters:

    L型封箱機.jpg


    紙板箱的質量要求: 

    1.紙板箱的類型(幾何折疊)     :FEFCO0410

    2.紙板裁切尺寸誤差範圍      :±2mm

    3.紙板衝壓的誤差範圍         :±2mm

    4.紙板衝壓/裁切位置公差範圍  :±2mm

    5.角度誤差      :0.05°(長度與寬度之間的直角度)

    6.不同的紙板質量都可能會影響機器性能、加工效率及產量

     

    The quality of the carton requirements:

    1. The type of carton (geometric fold) : FEFCO0410

    2. Paper cutting size error range: plus or minus 2 mm

    3. The cardboard punching error range: plus or minus 2 mm

    4. The board stamping/cutting position tolerance range: plus or minus 2 mm

    5. The Angle error: the biggest 0.05 ° (straight Angle between length and width)

    6. Different quality of cardboard are likely to affect the machine performance, processing and production efficiency

     

    用途: 

    1.使用對型號FEFCO0410紙板箱進行封箱

    2.連續封箱,封箱過程中包件不停止

    3.預先折疊好紙箱底部

    4.包裝方向:單邊操作

    5.適用於大批量作業

     

    USES:

    1. Used for model FEFCO0410 carton sealing

    2.In the process of continuous sealing, sealing the package does not stop

    3. The bottom of the folded cartons in advance

    4. Packing direction: unilateral action

    5. Applicable to large operations

     

    工作原理:

    1.輸入箱子的尺寸(長度、寬度、高度),封箱機按箱子規格一次性自動調節好設備,滿足封箱狀態。

    2.填充完工件的包裝箱進入輸送滾筒後加速,同時箱子垂直豎立的箱蓋被折平,包裝箱靠邊的長端被噴塗上熱熔膠,封好長邊,然後包件90度平移,再封兩個短邊;

    3.機器配設壓板將箱頂兩端折合處壓緊,包裝箱連續被輸送至下一個加工站;包裝箱後麵的橫向邊也以前麵同樣的方式封口;

    4.封箱速度:10-15/min

     

    Working principle:

    1. The size of the input box (length, width, height), sealing machine according to specification automatically adjust well the equipment box, meet the sealingState.

    2. After filling the container of finished work into the conveying roller speed, at the same time box lid was erected vertical fold flat, packing to pull overSealed end by spraying on the hot melt adhesive, long edge, then translation package 90 degrees, to seal the two short side;

    3. The machine, a pressure plate will or place pressure on both ends of the tank top, packing to be transported straight to the next processing station; packaging Box at the back of the lateral side are in the same way in front of the sealing;

    4. The sealing speed: 10 to 15 / min

     

    案例展示:Display case

    QQ截圖20180726112548.jpg